Terrain and water depth files for your laser

Cut a lake sheet by sheet and stack it, shallow to deep. Every kit has a LightBurn project, SVG and DXF for each bed, and a guide that walks you through it. A lake is $5, one time.
What you get
- LightBurn projectEvery sheet laid out in order.
- Cut filesSVG, and DXF in millimeters, one file per laser bed. The beds start at 400 x 400 mm (15.75 x 15.75 in), and you can set your own.
- Assembly guideA PDF that walks you through cutting and stacking, and a PDF of the steps, one page a step.
- HeightmapsCarving pictures, to engrave the surface instead.
- Depth stepsOn stepped lakes: the depth steps as flat drawings.
Choices in the Studio
- SheetsFrom 1 up to one more than the lake has depth levels, 60 at most. Each lake page says how many it can take.
- Dowel holesTo line the sheets up.
- Clear water sheetA clear acrylic sheet on top, like the surface of the lake.
- Depth numbers, roads, streets and town linesEach one is off until you switch it on.
A real kit
The Lake Louise laser kit, as we downloaded it from the Studio: 11 sheets of 3 mm (1/8 in), 33 mm (1.30 in) tall when stacked.
START HERE.txtWhat to open, and the stack's height.00 Assembly guide.pdfCutting and stacking, one sheet at a time.01 LightBurn projectEvery sheet in order.02 Cut files SVGSix beds.03 Cut files DXFThe same six beds.04 Assembly diagramsThe assembly steps, one page a step.ExtrasHeightmaps and depth steps.LICENSE.txtHow you may use the files.

Estimated lakes
Every lake gets a stack, estimated or surveyed. On an estimated lake the sheets come from modeled depths, and the assembly guide and the license say so: "Estimated depths, modeled from global data (GLOBathy), not surveyed."
More than lakes
Regions, mountains, ocean boxes and boxes on other worlds come as stacks of cut sheets too, from inside the Studio.
Lakes to start with
Lake MuskokaOntarioSurveyed70.0 m (230 ft) deep
Lake LouiseAlbertaSurveyed68.6 m (225 ft) deep
Crater LakeOregonSurveyed590.0 m (1,936 ft) deep
Lake SuperiorGreat LakesSurveyed380.0 m (1,247 ft) deep
Cut one
Open a lake in the Studio with Laser chosen and see the stack before you buy. Plywood, acrylic, whatever is on your bench.